SPARE PARTS LIST
INSTALLATION
INSTALLATION CHECKOUT
1256389-AN2-A Jan 2015
Page 2
Englefield
1256389-AN2-A Jan 2015
Page 3
Englefield
SORRENTO
Basin Mixer
INSTALLATION INSTRUCTIONS
SORRENTO
Basin Mixer
INSTALLATION INSTRUCTIONS
1.) Attach the inlet hoses(8) to the basin mixer body(1).
2.) Screw the threaded studs (6) into the mixer body and then place
the O-ring(3) onto the base(2).
3.) Feed the hoses through the basin hole and position the mixer in
place on the basin.
4.) From the underside of the basin, place the rubber washer(4) on
top of the mounting plate(5) and feed them over the threaded studs.
5.) Fit the nuts(7) onto the threaded studs and tighten to secure the mixer.
1.) Ensure that all connections are tight. Ensure that the handle is in
the off position.
2.) Open the basin drain as necessary. Turn on main water supply
and check for leaks. Repair as required.
3.) Remove aerator(9). Turn on the basin mixer. Run hot and cold
water through spout for about one minute to remove any debris.
Remove any debris from aerator. Shut off the basin mixer and
reinstall aerator.
1
2
3
4
5
6
7
8
9
10
11
12
13
No.
Description
Part No.
1 Handle
1250299-CP
2 Screw
1250284
3 Button
1250283-CP
4 Bonnet
1250279-CP
5 Nut
1250281
6 Cartridge 1250277
7 Washer
1250285
8
Aerator / Flow Regulator 1250293
9
Aerator Shell
1250290-CP
10
Base
1250307-CP
11
O-ring
1250313
12
Mounting Kit
1250272
13
Inlet Hose
1250270
1
2
3
4
5
6
7
8
9
