Kohler COMMAND CH18-CH26, Руководство по обслуживанию

Страница: 180 / 246

9.4
Section 9
Disassembly
Figure 9-11. Removing Tube from Breather Cover.
6. Remove the rubber breather tube from the
breather cover. See Figure 9-11.
Heavy Duty Air Cleaner
1. Disconnect the breather hose from the fitting in
adapter or elbow.
2. Remove the two screws (one-barrel carburetor
models), or the four hex flange nuts (two-barrel
carburetor models), securing the adapter or
elbow. See Figure 9-12.
Figure 9-12. Breather Hose, Mounting Nuts, and
Adapter Elbow (Two-Barrel Model Pictured).
3. Remove the screws securing the main support
bracket for air cleaner to the valve covers. On
two-barrel carburetor models , remove the two
mounting screws into the top of intake manifold.
Unhook the choke return spring if equipped. Do
not lose any of the hardware. See Figure 9-13.
Mounting
Nuts
Breather
Hose
Figure 9-13. Air Cleaner Bracket Mounting Screws
(Two-Barrel Model Pictured).
4. Remove the heavy-duty air cleaner as an
assembly from the engine. See Figure 9-14.
Mounting Screws
Figure 9-14. Removing Heavy Duty Air Cleaner
Assembly (Two-Barrel Model Pictured).
Remove Fuel Pump
WARNING: Explosive Fuel!
Gasoline is extremely flammable and its vapors can explode if
ignited. Store gasoline only in approved containers, in well
ventilated, unoccupied buildings, away from sparks or flames.
Do not fill the fuel tank while the engine is hot or running,
since spilled fuel could ignite if it comes in contact with hot
parts or sparks from ignition. Do not start the engine near
spilled fuel. Never use gasoline as a cleaning agent.
Pulse Style Pumps
1. Disconnect the fuel lines at the carburetor and at
the in-line fuel filter. See Figure 9-15.