-2-
Install the Basin
Note!
The lavatory tops must be installed on a cabinet (refer
to Installation and User Guide packed with the cabinet for
installation details).
Recommend Kohler bathroom furniture for support or
decoration.
!
(
)
!
·
76mm
·
Rough-in the supplies and the drain piping.
The supply stop handles cannot extend more than
76mm from the finish wall when in the open position.
NOTE:
·
·
10mm
(
)
65-
75mm
1.
78mm/81mm(
)
3.
2.
2
3
·
·
Drill two 10mm hanger bolt holes at the marks on the wall.
The nylon anchors is needed for concrete wall (supplied).
Mount hanger bolts to the wall so approximately 65-75mm
of each bolt remains exposed.
1. The distance from center of vanity drain hole to the
wall is 78mm/81mm(see roughing-in), and please
choose suitable drainage pipe.
2. Height dimensions marked in Fig. 2 and Fig. 3
could be adjusted as per the cabinet height. Hot
and cold water inlets are adjustable according to
actual installation conditions.
3. Other fastening devices of sufficient size and
strength may also be used.
NOTE:
K-22780T-1
Fig.#1
1
Attachment
Bolt (x2)
Wall Plug
*480mm
Waste
Outlet
Waste
*495mm
*825mm
*80mm
138mm
475mm
Fig.#2
2
K-22779T-1
FAMILY CARE Vanity 800mm
800mm
132
450
81
120
185
552
200
610
35
1000
136
380
85
558
Kohler reserves the right to change marked dimensions without prior notice.
1365697-T01-A
