Kohler C3-300, Руководство для владельцев жилья

Страница: 24 / 28

TROUBLESHOOTING (cont.) /
疑难解答（续）
1367362-T01-E 24 Kohler Co.
Clean Functions
Phenomenon Possible Causes Recommended Solution
6. No water flow. A. The water supply valve is
turned off.
B. The seat-on sensor fails to
detect the user.
A. Open the water supply valve.
B. Check how to activate
the seat in “INSTALLATION
INSPECTION” section.
7. Low spray water
pressure.
A. Filter is clogged.
B. Insufficient water supply
pressure.
A. Refer to “CLEAN FILTER”
section.
B. Raise water pressure into
the pressure range required
by the product.
8. Water stops
spraying from
the nozzle before
wash finishes.
A. Spray function auto stops
after continuous spraying for 1
min.
B. The seat-on sensor fails to
detect the user.
A. If needed, press the spray
button again.
B. Check how to activate
the seat in “INSTALLATION
INSPECTION” section.
9. Water comes
out from the hole
beside the nozzle
during spraying.
A. A protection method from
high pressure inside the
product.
A. Normal phenomenon.
10. Water comes
out from the nozzle
when the product is
seated on.
A. Residual water in the wand
is auto-drained before the user
resumes using the product
after a long time.
A. Normal phenomenon.
Slow Seat Closure
Phenomenon Possible Causes Recommended Solution
11. The speed of
the seat and cover
closure varies
in summer and
winter.
A. Due to changes in room
temperature.
A. Normal phenomenon.
Seat-on Sensor
Phenomenon Possible Causes Recommended Solution
12. Clean function
operates when
pressing spray
button while the
seat is not in use.
A. The seat-on sensor is
covered by an object or the
seat is wet.
A. Remove water or objects
from the seat-on sensing area.