TROUBLESHOOTING (cont.) /
疑难解答（续）
Clean Functions
Phenomenon
Possible Causes
Recommended Solution
5. Low spray
water pressure.
A. Filter is clogged.
B. Insufficient water supply
pressure.
A. Refer to “CLEAN FILTER”
section.
B. Raise water pressure into
the pressure range required
by the product.
6. Water stops
spraying from
the nozzle before
wash finishes.
A. Spray function auto stops
after continuous spraying for
5 min.
B. The seat-on sensor fails
to detect the user.
A. If needed, press the spray
button again.
B. Check how to activate the
seat in the “INSTALLATION
INSPECTION” section of the
“Installation Guide."
7. Water comes
out from the hole
beside the nozzle
during spraying.
A. A protection method from
high pressure inside the
product.
A. Normal phenomenon.
8. Water comes
out from the nozzle
when the product
is seated on.
A. Residual water in the
wand is auto-drained before
the user resumes using the
product after a long time.
A. Normal phenomenon.
Slow Seat Closure
Phenomenon
Possible Causes
Recommended Solution
9. The speed
of the seat and
cover closure
varies in summer
and winter.
A. Due to changes in room
temperature.
A. Normal phenomenon.
1396807-T01-A
26
Kohler Co.
