USE GUIDE /
使用指导
USE GUIDE /
使用指导
PREPARATIONS BEFORE INITIAL OPERATIONS /
初次使用前准备
■
■
Connect water inlet hose according to Installation Guide. Open water
■
Plug power cord into socket. Bidet seat generates one short beep,
■
During initialization, it is normal to hear motor rotating and water flow.
■
Test according to “USE GUIDE” section.
■
Factory settings for initial use.
Water temp: Mid
Seat temp: Mid
Dryer temp: Mid
Lighting: ON
Energy save: OFF
Sanitize: ON
Deodorize: ON
•
Water flow: Mid
•
Spray position: Mid
Rear wash:
•
Water flow: Mid
•
Spray position: Mid
女用：
•
水流强度：中档
•
冲洗位置：中档
臀洗：
•
水流强度：中档
•
冲洗位置：中档
The above settings are for the full-functional version. For differences in
the specifications of models, refer to their product configuration matrix.
以上设置为全功能版本，具体型号的规格差异见产品配置表。
Ensure if water inlet valve is OPEN.
确认进水阀是否已打开。
stop valve, and plug power cord.
按安装说明书接上进水软管，打开止水阀，插上电源。
Nightlight flash. wand extends and retracts once, until initialization completes.
当电源线插上电源插座，便盖发出短蜂鸣
1
次，喷管伸缩
1
次，夜灯闪烁
,
直至初始化结束。
初始化过程中，可听到电机转动声和流水声，均属正常。
参照“使用指导”章节进行测试。
初次使用时为出厂设置状态。
Front wash:
水温：中档
圈温：中档
风温：中档
夜灯功能：开启
节能模式：关闭
除菌功能：开启
自动除臭：开启
1396807-T01-A
18
Kohler Co.
