4
114825-5-
AA
(A)
Kohler Co., Kohler WI
2. HOW YOUR BODYSPA MODULE BATHING SYSTEM WORKS
A. YOUR BODYSPA SYSTEM
Your BodySpa module is designed to give you a
complete body hydro-massage for an invigorating
experience. The BodySpa gives you complete freedom
of movement (and choice) to concentrate your
hydro-massage on specific areas of your body. Your
BodySpa module may include a conventional whirlpool
system to increase your hydro-massage options.
An easy-to-read control switch – one for the Body Jets,
and one for the whirlpool (if equipped), is mounted inside
the module for quick access. You can vary the intensity
of your hydro-massage experience from gentle to
vigorous with the touch of a finger.
B. BODYSPA BASICS
Your BodySpa needs less than 30 gallons of water to
operate because it recirculates the tempered water you
put in the bath basin. Approximately 45 gallons of water
is needed to operate the whirlpool.
The BodySpa and whirlpool systems recirculate water
from the bath basin, through the pump and heater, out
the Body Jets or Flexjets, and back into the bath basin.
This cycle continues as long as your BodySpa is
running. The BodySpa and whirlpool will not operate at
the same time.
SUCTION
WHIRLPOOL
CONTROL
SWITCH
PUMP AND
HEATER
BATH BASIN
BODY JETS
FLEXJETS
BODYSPA
CONTROL
SWITCH
