-4-
7. The installation of pinch plate, the pinch plate installation
provides another method for faceplate, that is, the
faceplate don't rely on the position of the in wall tank and
the mask, and can directly install the faceplate to the false
wall. The location of faceplate to refer the 1 meter high
from the finished floor to center of faceplate is
recommended. 7~20mm thickness is recommended for the
wall of the pinch plate and at least 80mm gap is reserved.
Recommended the installation hole size of
201
X 136
mm. See figure
8. The installation of mask, 4 holes with diameter of 10mm
and depth of 16mm are needed to be reserved at the
locating hose. Drill 10mm holes through air hose on the
side of mask. See figure
7.
1
7~20mm
80mm
201
X 136
mm
8.
4
10mm
16mm
10mm
+2
0
+2
0
+2
0
+2
0
At least 80mm gap reserved
80mm
Air hose
Pinch plate
Finished wall
Supporting
Board
7~20mm recommended
7~20mm
201
136
+2
0
+2
0
Height
Suggested/
1150
4
Finished Floor
1098
4
1066
4
1048
4
267
5
100
3
35
2
52~230
478
3
438
3
230
3
180
3
667
4
1000
205
3
Air hose
Finished
wall
Fix Mask Onto Wall
10 Hole through hose
10
10 Depth 16,
Space reserved
10
16
72
1331845-T01-B
