background image

ENGLEFIELD

INSTALLATION INSTRUCTIONS

KOHLER NZ LTD
NEW ZEALAND

Free Fax: 0800 664 488
Free Ph:  0800 100 382
www.eng

lefi

eld.co.nz

KOHLER AUSTRALIA
AUSTRALIA 

Free Ph:  1 800 ENGLEFIELD 
 

 

(1 800 364 533)

www.eng

lefi

eld.com

For warranty information, please visit our website.

CONTACT & WARRANTY INFORMATION

 

To install the wall follow the approved 
adhesive manufacturer instructions. 

As a general rule, place wall into position (check
shelves fit correctly for moulded corner models).
Press firmly back into the corner to ensure that
the wall makes full contact with the corner along
its entire length.

Press into corners 

rst, then press toward 

edges. Use a soft clean cloth to press 

rmly 

and remove any rippling along glue lines. 
Check and re-press if necessary. 

For corner mouldings, 
re-install the shelves
while the adhesive
is setting.

Allow the adhesive to cure before installing the
shower or bath and/or using the enclosure.

CLEANING INSTRUCTIONS

Use non-abrasive soap and warm water. 

 Avoid:

• harsh chemicals and disinfectants.

• abrasive cleaners

• solvent based cleaners 

• acid or alkaline cleaners

• products containing ammonia or peroxides.

Wipe out the unit after each use to prevent 
build-up of soap and scum.

Always read the label instructions on any 
cleaner carefully before applying it to the 
surface.

Page 9

DURACRYL WALL INSTALLATION CONT...

Remove the plastic film from liner before use. 

Read the Care & Maintenance
label on the wall and leave it
in place for the end user.

!

IMPORTANT

DURACRYL WALL

Содержание BATH WALL










Отзывы: