background image

   

                                                                          

1215002-2A-B            

                                                                                                                                        2  

  

   

                                                                          

1215002-2A-B          

                                                                                                                                          3

  

INSTALLATION

Select a suitable location to drill two holes on the finished wall 

according to the rough-in dimensions and diameter of the anchor(1), 

their distance is 712mm. Press the anchors into the holes.

Customer could select and install the slide bar escutcheon(2): 349T, 

421T or 974T.

Apply a ring of plumbers putty or sealant into the groove on the 

backside of an escutcheon. Position an escutcheon and post(3) over 

the mounting hole. Secure an escutcheon and post to the wall with a 

screw(4). Loosely tighten the screw.

Hold the slide bar up against the posts. Adjust the position of the posts 

until the slide bar fits snug against the curved cutout of the posts. 

Remove the slide bar and tighten the screws to secure the posts.

Thread the pin(5) into the post; tighten with a flat blade screwdriver.

Line up the hole of each lock assembly(6) with the holes of the slide 

bar. If needed, use a screwdriver to adjust the position of the lock 

assemblies.

Align the pins with the holes in the slide bar and slide bar locks. Insert 

the pins through the slidebar and lock assemblies.

Secure the slide bar by tightening the setscrews

(7)

 into the lock 

assemblies

Press the cap

(8)

 into each end of the slide bar.

SERVICE PARTS

**Color code must be specified when ordering

INSTALLATION CHECKOUT

Ensure that all coupling nuts are tightened.

The height of handshower holder can be adjusted by pressing the 

pinch cock and sliding up and down.

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft 

cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely 

affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings.

                                     8524T                          

 

Slider Bar

349T    421T    974T    

Slider Bar Trim

Apply a ring of 

plumbers putty 

or sealant

5

4

4

5

6

7

8

3

3

712mm

2

2

1

1

7

8

1061576

1033803

1033800**

1033799**

1040644**

34300

34300

1033797**

1040645**

1276023**

   

Pinch cock

Отзывы: