1293177-AN2-B
1
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. The dimension from the finished wall to the centerline of the valve decided by the trim selection.
2. An inline water filter must be used with this product.
3. Flush the water supply pipes thoroughly to remove debris.
4. Observe all local plumbing and building codes.
5. Shut off the main water supply.
6. Do not remove the rubber protectors from the valve body until instructed to do so.
7. Check for leaks before covering the pipes, repairs as needed.
8. Inlet & outlet threads of valve are Rc1/2
˝.
9. Please ensure only apply water pressure test on the product, and empty the air in pipe and faucet thoroughly
before the test. Please ensure test pressure below 0.8MPa(8bar) and test duration within 30 minutes.
10. All installations should comply with the relevant requirements of AS/NZS 3500.
HANDLE OPERATION
For 78980T-DR, lift diverter, turn clockwise until it stops for shower, turn counter-clockwise until it stops for bath
spout.
INSTALLATION INSTRUCTIONS
78980T-DR
40MM Bath Shower Valve With Diverter
78981T-DR
40MM Shower Only Valve
78980T-DR
40MM Bath Shower Valve With Diverter
78981T-DR
40MM Shower Only Valve
ROUGH-IN DIMENSIONS
78981T-DR
Rc1/2˝
Centerline of valve
Decided by trim selection
Ground
1220
Rc1/2
˝
48
14
58
Rc1/2
˝
26
24
64
1293177-AN2-B
4
SERVICE PARTS
**Color code must be specified when ordering
48694
3006991
3012353
1311226
78980T-DR:1293992**
