1212002-AN2-A
2
1212002-AN2-A
3
INSTALLATION CHECKOUT
Ensure that all connections are tight. Ensure that the handle is in the off
position. Turn on the drain and main water supply, and check for leaks. Repair
as needed.
Remove the aerator kit(7) by coin. Turn on the faucet. Run hot and cold water
through the faucet for about one minute to remove any debris.
Check for leaks. Repair as needed. Remove any debris from the aerator kit.
Shut off the faucet. Reinstall the aerator kit.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
INSTALLATION
2
3
1
4
5
6
7
How To Install The Faucet
Install the mounting stud(2) onto the faucet body base(3). Insert lift rod(5) to the
hole at the rear of the body. Slide the washer(4) over the flexible hoses(1) and
mounting stud, and into the groove at the bottom of the faucet body.
Insert the faucet assembly into the lavatory hole. Position the faucet. From
underside of the lavatory, place the brackets(5, Rubber washer is on the top)
onto the mounting stud, and secure the faucet with the nut(6).
Attach the hoses to water supplies. The hose with blue round is for cold water,
the hose with red round is for hot water.
ALEO
SERVICE PARTS
**Color code must be specified when ordering
3016002**
3015547**
1219254
1219253
3008414
871472
3008523
72275T-4ND:1054592
98868T-4ND:1054593
833438
836664
1220841
1220841
72275T-4ND
Single Lever Basin Mixer
98868T-4ND
Single Lever Tall Basin Mixer
