1-6 Specifications
TP-5631 7/96
Remote Emergency Stop Kit
(microprocessor controller)
The emergency stop kit allows immediate shutdown of
the generator set from a remote location.
See
Figure 1-6. The emergency stop lamp lights and the
generator set shuts down if the emergency stop switch
is activated. The generator set cannot be restarted until
the emergency stop switch is reset (by replacing glass
piece) and the controller is reset by placing generator
set master switch in the OFF/RESET position.
A-222654
Figure 1-6. Emergency Stop Kit
Single-Relay Dry Contact Kit
(microprocessor controller)
The single-relay dry contact kit uses one set of relay
contacts to trigger customer-provided warning devices
if a fault condition occurs. See Figure 1-7. A wiring
harness included with the kit links the relay kit with the
controller terminal strip or controller connection kit.
Reference the accessory wiring diagram for correct
connection of the single-relay dry contact kit wiring
harness. Connect the single-relay dry contact kit to any
controller fault output (on TB1 terminal strip). Typical
connections include:
Emergency Stop
Auxiliary
Overspeed
Low Oil Pressure
High Engine Temperature
A-273945
Figure 1-7. Single-Relay Dry Contact Kit
