1209792-**
Showerhead
(only for 45429IN)
1182075-**
Showerhead
(only for 16356IN-A)
1061577-**
Shower Arm
(only for 45429IN/ 16356IN-A)
1178080-**
Escutcheon
(only for 45429IN/ 16356IN-A)
1209928-**
Showerhead
(only for 45431IN)
1174543-**
Escutcheon
(only for 45431IN)
1174539-**
Shower Arm
(only for 45431IN)
1
3
2
176596IN Rev-B
176596IN Rev-B
Remove the temporary nipple. Slide the escutcheon over the shower arm(2). Apply tape or
sealant to the shower arm, and install the shower arm into the shower elbow(1). Tight with a
strap wrench. Push the escutcheon against the wall.
Flush both water supplies through the shower arm for one minute before the shower head is
installed. Apply tape or sealant to the exposed end of the shower arm. Tighten the
showerhead(3) with a strap wrench.
SHOWERHEAD WITH ARM & ESCUTCHEON
16356IN-A
45429IN 45431IN
All Finishes: Clean the finish with a mild soap and warm water. wipe entire surface completely with a clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc.,
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
To dislodge debris and mineral
build-up:
Ru
n water through the showerhead.
Firmly rub your
finge
r back and forth
across the spray holes in the
showerhead face
CLEANING INSTRUCTIONS
SERVICE PARTS
INSTALLATION
2
3
**Color code must be specified when ordering