2
1151983-W2-A
INSTALLATION
1.
Turn off the water supply.
2.
Make sure that the showerhead is installed by a competent installer.
3.
Before installation carefully inspect the new fixture for any signs of damage.
4.
Kohler Co. reserves the right to make revisions in the design of products without
notice.
5.
Observe all the local plumbing and building codes and standards.
BEFORE YOU BEGIN
Handshower may differ slightly from the one shown, but the installation method is
the same.
1.
Run water through the shower outlet to flush out any dirt and debris.
2.
Tighten the handshower onto the hose until hand tight. Do not overtighten.
3.
Install the hose onto the shower outlet.
4.
Use a suitable spanner to tighten the hose onto the shower outlet. Do not
overtighten.
Install the Handshower
Handshower
Handshower Hose
To Shower Outlet
Inlet