Koganei EG110, Инструкция по эксплуатации, Страница: 9 / 14

Order Codes
Additional parts (to be ordered separately)
EG1 - -
Operating pressure range
10
: For vacuum 0 〜− 101kPa
[0 〜− 14.6psi.]
20 : For positive pressure 0 〜 1MPa
[0
〜
145psi.]
21 : For positive pressure 0 〜 100kPa
[0 〜 14.5psi.]
Pressure gauge with
electronic switches
Panel mounting parts
Blank : No panel mounting parts
P : With panel mounting parts
Protective front cover
Note
Blank : No protective front cover
K : With protective front cover
Note: The protective front cover may be selected only when the panel
mounting parts are selected. The protective front cover cannot by
itself be mounted on the pressure gauge with electronic switches.
Panel mounting
parts Protective front
cover
PM100 KB100
Reliably measures the pulsating pressure in
locations that the conventional Bourdon tube
pressure gauge has always had difficulty with,
and without worries about breakage.
The pressure gauge comes equipped with an
LED analog indication using a semiconductor
pressure transducer.
The electronic mode, without any mechanical
moving parts, assures longer operating life,
better reliability, and higher precision than the
Bourdon tube pressure gauge.
Front side Rear side
EG110, EG120, EG121
Connection port
R1/4
Inside M5 × 0.8 (female thread)
Pressure inidcator (red)
Can also inidicate short-circuit errors.
Pressure setting indicator
(interlocked with pressure
setting dial)
All set when the dial needle aligns
with the desired setting.
Power supply inidicator
(red)
Pressure setting dial
Can easily set the pressure even
when the power supply is OFF.
Operation indicator (red)
Lights up when output is ON.
Secondary
pressure indication
Main
pressure indication
1/2DOT indicator (green)
Displays half of the pressure
indication scale.
Cable
Plastic case
PRESSURE GAUGES WITH
ELECTRONIC SWITCHES