background image

Note: 
  

·

 The cleaning robot cannot be used to remove liquids.

  

·

 If the battery level is less than 20%, the machine cannot work. Please charge it.

  

·

 The machine will return to the charging base automatically if the battery level is less than 20% 

when in use and will be powered off and start cleaning automatically after the battery level reaches 
80%.

  

·

 

Please clear various wires (including power line of charging base) on the ground before use so as to 

avoid outage and damage of objects or wires when wires are dragged by the host.

Charging:

Automatic mode: The host will return to the charging base automatically after work.

Manual mode: Under suspended state, short press      key to start recharging or when the recharging 
host is charged under the control of mobile APP, The indicator light is under breathing mode when 
the recharging host is charged

Note: If the host fails to locate the charging base, it will return to the original position automatically. 
Please put the host back to the charging base manually.

Fixed-Point cleaning:

If a specific area requires deep cleaning and user fixes a point in the map by APP, the machine will 
move near to the point automatically and sweep the floor within 2mx2m (twice by default and the 
number of times can be set).

Cleaning mode

After being started, the host will scan and generate the map and divide it into areas intelligently. 
Sweep the areas one by one along the wall orderly, efficiently and thoroughly and plan the cleaning 
route in a bow shape. The machine will return to the charging base automatically after work.

Completed area

Completed area

Area to be cleaned

Area being cleaned

Note: Please do not move the machine arbitrarily and frequently in use. If the machine is moved, 

please put it near the original position and try to relocate the machine when it is restarted. If it is 
relocated successfully, the machine will continue working according to the planned route. If it is 
relocated unsuccessfully, the machine will give the task and rebuild the map and it may be unable 
to be recharged

14

Содержание SmarterHome LX10

























Отзывы: