Kogan SMARTERHOME KASHMFP20BA, Руководство пользователя

Страница: 6 / 24

CONTROL PANEL
Power button
• Press to turn the appliance On and Off.
• When the product is in standby, press and hold the Power button for 3 seconds to
perform WIFI reset. Use this to place the product in SmarterHome pairing mode.
•
When the product is in operation, press and hold the power button for 5 seconds to
change from Celsius (°C) or Fahrenheit (°F).
Flame button
•
Tap to adjust the Flame brightness between 5 (High) and 1 (Low).
•
Hold for 3 seconds and then tap to change the flame colours (C1 - C7).
Heat button
• Press to change between the different levels of heating. The chosen level will be
shown on the Heating Level indicator. When the lower bar is illuminated, the fire is
running at Low, when both bars are illuminated, the fire is running at High.
• Hold the button for 3 seconds, then tap to select the desired temperature (18 - 35°C).
Timer button
• A power-on timer can be set by repeatedly pressing the timer button while the unit is
in standby; this can be set from 0 hours to 9 hours in one-hour intervals.
C1
Warm White + Red + Blue
C5
Blue
C2
Warm White + Red
C6
Red
C3
Red + Blue
C7
Warm White
C4
Warm White + Blue
Power
Flame Heat
Timer
Timer Button
Heat Button
Flame Button
Power Button
OPERATION