12
Warm mode
1.
Press the “Warm mode” button to activate. The LED display will show the current
temperature.
2.
Press the ‘Increase temperature’ and ‘Decrease temperature’ buttons. The LED display
will start flashing and users can adjust the desired temperature between
1-30°C.
3.
After the desired temperature is set, wait and the LED display will stop flashing. It will
change to show the current temperature. This will increase as the area heats up.
4.
After the Warm mode has run for over 9 hours, the fan heater will automatically stop
operating. Restart by pressing the ON/OFF button on the LED display or remote
control.
Notes:
•
The default set temperature is 25°C.
•
The temperature set should be higher than the current temperature. The heater
will not turn on otherwise.
Notes:
•
When the ambient temperature reaches the set temperature, the heating
function will stop, and the fan heater will begin to blow cool air under lowest
speed.
•
When the ambient temperature drops lower than the set temperature, the
heating function will automatically reactivate to maintain the set temperature.
