Installing Charger Base
This charger base is designed to be wall mounted.
Note: care should be taken to ensure that there are no dangerous objects hidden beneath the
wall surface (e.g. electrical wires, pipe, etc.)
1.
Insert the jack of adaptor (M) into the socket of charger base (L). (Fig.1)
2. Install the charger base to the wall within reach of an electrical outlet.
3. Use a 5mm drill for drilling holes for the plastic anchors.
4. Insert anchors and screw the charger base (L) onto the wall. (Fig.2)
Fig 1.
Fig 2.
Charging the Battery
This vacuum cleaner is supplied in a low charge condition. It should be charged for 6 hours prior
to initial use.
Note
: Recharge your appliance after storing for a long time.
Charge the appliance when the Charging indicator (F) is flashing red during operation. Only
charge the vacuum cleaner with the charger (M) and charging base (L) supplied.
1.
Insert the small plug into the charging base (L), and you can let the charging base (L)
stand on a table or fix it on a wall, and then inset the charger into the wall socket
2. Place the vacuum cleaner onto the charging base (L). (Fig.3) or insert the jack of the
adaptor (M) into the socket of unit. (Fig.4)
3. The charging light turns red to indicate that the appliance is charging.
4. The charging light turns blue to indicate that the appliance is fully charged.
Fig. 3
Fig. 4
4
Содержание KAVACSTK18VA
Страница 1: ......
