Kogan KARTUFONNA, Руководство пользователя

Страница: 4 / 5

Charging the Quad-copter Batteries
Using the supplied USB cable, plug the connector into the charging
port on the quad-copter, then plug the large USB plug into a USB wall
charger or a computer.
LED indicator Charger Specifications
Red light ON Red light OFF Input Charging Current Full Voltage
Charge complete Charging 5V 200 MAH 4.2
Battery and Charger Specifications
Battery Type Battery Specification Usage Duration Charge Time
Li-po Battery 3.7V 100mAh Approx 4 minutes Approx 30 minutes
Pairing Remote Control and Receiver
Step One
Turn the quad-copter power on, then place it down on a flat location. The
status indicator will flash. Do not move the device as the gyroscope is
calibrating.
Step Two
Turn the remote control on, the push the throttle stick down to it's lowest
point, then push it up to the highest point. The remote control will send out
a signal and pair with the quad-copter
Step Three
After use, please turn off the quad-copter to avoid depleting the batteries
further.
WARNING: If left paired and operating for too long, the battery may be
damaged due to over-discharge and may even become a fire hazard.
Step Four
Turn off the remote control. If the remote control is not going to be used
for an extended period of time, please remove the batteries.
3