12
9. Fault Indication
The following warnings appearing on the display indicate corresponding faults of the
refrigerator. Though the refrigerator may still have cold storage function with the following
faults, the user shall contact a maintenance specialist for maintenance, so as to ensure
optimised operation of the appliance.
Error Code
Fault Description
E1
Temperature sensor failure of refrigerating chamber
E2
Temperature sensor failure of freezing chamber
E5
Freezing defrost sensor detection circuit error
E6
Communication error
E7
Ambient temperature sensor error
Water Dispenser
•
Only clean drinking water should be used in the water tank. It is strongly
recommended not to use anything other than water in the tank (Example,
carbonated soft drinks, milk, juice, etc.).
•
Do not fill the water tank past the maximum point as indicated.
•
If the dispenser is not flowing as expected, check the water tank is securely in
place and flush against the door. Ensure all piping is correctly in place.
•
Drain the water tank completely before removing from the refrigerator.
•
Do not remove any of the dispenser’s plumbing in the refrigerator door.
•
Clean the water tank before first use and when the dispenser has not been used
for a long time (after draining completely).
•
It is recommended to clean the water tank every three months. Be careful when
opening and closing the door of the water dispenser and water tank to avoid
spilling water.
