7
Attaching Carpet Gilder
•
Press the micro-fibre cleaning pad (H) with main body to the carpet gilder (I) using
vertical pressure, until it’s in place.
•
To remove, place the front of your shoes onto the cleaning pad removal tab and
press down firmly, the carpet gilder will remove from steam head.
Operation
1. Fill the water tank.
Method one:
•
Open the water tank cup (9) by turning anticlockwise, fill with 350ml water using a
measuring cup and then turn clockwise to close water tank cup (9).
Method two:
•
Remove the water tank from main body, open the water tank cup (9) by turning
anticlockwise, fill the water tank from the water faucet and then turn clockwise to
close water tank cup (9).
•
Install the water tank (9) to main body F until it clicks into place.
2. Plug in the appliance to a grounded outlet.
3. When switching the appliance on, the indicator lights will turn red, indicating preheating. If
the lights do not illuminate, please check the “troubleshooting” section for more details.
•
The product has a cold warm-up time of 30 seconds, after the completion of preheat,
the indicator lights turn blue and the product begins to work.
NOTE: If power fails in the middle of the warm-up or after the warm-up is complete, the
product may repeat the above warm-up operation when power is connected again.