6
Assembly Instructions
NOTE: Each steam mop is 100% tested in the factory to ensure product performance and
safety. When assembling your new steam mop for the first time, you may notice water residue
inside of the unit.
! WARNING: Before attempting any of the following operations, make sure that the appliance
is switched off and unplugged and that the appliance is cold and contains minimal or no
water.
Attaching the Handle
•
Slide the handle tube (B) into the handle (A) until it clicks into place.
•
Slide the handle tube (C) into the handle tube (B) until it clicks into place.
•
Slide the handle tube (C) into main body F, until it clicks into place.
•
The handle can be removed from the steam mop body for easy storage by pressing
the handle tube button.
Attaching the Steam Head
•
Slide the bottom end of main body (F) onto the steam head (G) until steam head
spindle clicks into place.
•
The steam head (G) can be removed from the main body (F) by pressing salient
point on the steam head spindle.
Attaching a Cleaning Pad
•
Because of hook and eye design at the bottom of the steam head (G), just place a
micro-fibre cleaning pad (H) to steam head, they will attach.
•
To remove, place the front of your shoes onto the cleaning pad removal tab and
press down firmly.