Kogan KAM236TMSFA, Руководство пользователя

Страница: 18 / 24

18
Overall cleaning
• Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the
cooling effect and energy saving.
• Check the door gasket regularly to make sure there are no debris. Clean the door
gasket with a soft cloth dampened with soapy water or diluted detergent.
• The interior of the refrigerator should be cleaned regularly to avoid odour.
•
Turn off the power before cleaning interior, remove all foods, drinks, shelves, drawers,
etc.
•
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons
of baking soda and a quart of warm water. Then rinse with water and wipe clean. After
cleaning, open the door and let it dry naturally before turning on the power.
• For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps
or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc.
and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure
no contaminants or bacterial accumulation in these areas.
• Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause
odours in the interior of the refrigerator or contaminated food.
• Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy
water or diluted detergent. Dry with a soft cloth or dry naturally. Wipe the outer surface
of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and
•
Wipe the outer surface of the refrigerator with a soft cloth dampened with soap water,
detergent, etc. and then wipe dry.
•
Do not use hard brushes, clean steel balls, wire brushes,
abrasives (such as toothpastes), organic solvents (such as
alcohol, acetone, banana oil, etc.), boiling water, acid or
alkaline items, which may damage the fridge surface and
interior. Boiling water and organic solvents such as benzene
may deform or damage plastic parts.
•
Do not rinse directly with water or other liquids during
cleaning to avoid short circuits or affect electrical insulation
after immersion.
CLEANING & CARE