Wall Mounting Installation Guidelines
For wall mounting with an optional bracket, please read the following instructions in conjunction
with the bracket's instructions. If you are not confident of your abilities to mount the TV, please
seek assistance from qualified personnel. Kogan.com is not liable for any damage or injury
caused by an incorrectly mounted television.
This television can be mounted as follows:
1. Place the LED television face down onto a solid surface. Please place some soft cloth
material over the front of the screen to protect it from any damage. The screen is a fragile
component and must be suitably protected when removing the base stand. Be sure that
no hard or sharp objects can come into contact with the screen surface. Do not exert
pressure on the front of the unit at any time, as this may damage the LED screen.
2. Remove the four long screws from the lower part of the television where the desk stands
are attached to the TVs body and remove the stands (store the stands and screws in a
safe location for future use).
3. Use the four M6 screws provided with your TV to fix it onto your wall mounting bracket
(not included), via the four VESA standard holes on the back of the television.
Antenna
Aerial connections: IEC (PAL-type, female).
Input impedance: 75ohms unbalanced
Power
AC Input: 100-240V ~ 50/60Hz 175W
Note: Unwind the mains power cord to it's full length prior to initial use, and locate it away from
other cables that will be connected to the TV.
6
400mm x 200mm VESA
wall mounting hole spacing
and locations
Plug (not supplied)
Outdoor antenna (not supplied)
Содержание KALED32***YD
Страница 1: ......
