Kogan KALED32***YD, Руководство пользователя

Страница: 6 / 23

Installation
Thank you for purchasing this 55” UHD LED TV. Before connection and operation of this product, please
read through this user manual carefully, and keep a copy of the manual handy for future reference.
Remove the TV carefully from its packaging, taking care not to apply any pressure to the front of the
screen. Some accessory items may be located in cut-out sections of the internal packaging, so take care not
to miss these items and discard them by mistake. Once all items are removed from the packaging, use the
list below to check that nothing is missing. If any items appear to be missing, contact the Kogan.com
customer support team.
•
55” LED TV x 1
•
Desk Base stand assembly x 2
•
Remote control x 1
•
Pack of four 26mm screws x 1
•
Pack of two AAA batteries x 1
•
Pack of four M6 screws x 1
Once all accessory items have been accounted for, prepare a location where you can attach the base stands
to the bottom of the TV. You will need to arrange a soft cloth that is large enough to cover the front face of
the TV, as well as a Philips head screwdriver to attach the base stands.
Before proceeding to the Getting Started section of this manuals, please continue reviewing this Installation
chapter to ensure that your TV is correctly connected to your TV antenna and related AV equipment (eg.
DVD or Blu-ray player, amplifier, sound bar etc).
Base Stand Assembly Instruction
Prepare to place the TV with the display side down onto a flat surface. Due to the size and
weight of this TV, the use of 2 people is recommended when moving it. Ensure the table or desk
you use provides a flat, totally clean surface, and use a soft cloth between the face of the TV and
the table to help protect the TV's screen.
1. Identify the 2 rectangular shaped holes in the bottom panel of the TV, located
approximately 38cm from each side of the TV. These holes accept the rectangular section
of the metal desk stands, which are then held in place by 26mm long screws.
2. One each desk stand, identify the longer leg of the stand, then slide the rectangular
section of the desk stands into the TV so that the longer leg is facing towards the front of
the TV.
3. Insert the 26mm long screws into the holes in the rear of the TV that line up with the
holes in the rectangular section of the metal desk stands, then tighten the screws firmly.
You may need to slightly jiggle the metal base stands around in their holes to allow the
screws to be correctly seated prior to being tightened.
5