Fishing on Ice
21
hull, if it still doesn't work on all hulls and you may
have to place the sensor directly in the water for
proper operation.
To achieve the best performance for ice fishing, it is
highly recommended that you cut a hole through the
ice and place the sonar sensor directly in the water.
If you would like to check the area for depth or fish
before cutting the hole
then follow these instructions
.
Clear away snow to expose the ice surface, making
sure the surface is smooth.
Place a small amount of liquid water on the ice and
set the sonar sensor on the water allowing the unit
to freeze to the ice.
If there are any air pockets
between the sonar senor and
ice, or air on the water below
the ice, the unit will not work
properly and will require you to
try another spot, or cut a hole
in the ice to use.
Содержание KAFSHXXGRYA
Страница 1: ... yy Zz USER MANUAL ...
