Kogan KA400TPMNTA, Руководство пользователя

Страница: 5 / 20

•
Do not modify: Do not attempt to alter or modify this appliance in any way
• Repair: Do not attempt to repair or replace any part of this appliance unless it is
specifically recommended in this manual. All other servicing should be referred to a
qualified technician. Contact Kogan.com for advice.
Electrical safety
•
Voltage: Before connecting and turning on the appliance, ensure the electrical
voltage and circuit frequency correspond to that indicated on the appliance rating
label.
• Earthing: This appliance should be properly earthed for your safety. The power
cord of this appliance is equipped with a three-prong plug for use in standard wall
outlets to minimise the possibility of electrical shock. Do not modify the cord
and/or plug provided with the appliance. Improper use of the earthed plug can
result in the risk of electric shock.
•
Connection: This appliance requires a standard 220-240V AC 50Hz electrical
outlet. Do not overload the electrical circuit.
• Power cord: Do not kink or damage the power cord; do not leave it exposed or
dangling. Secure it at the back of the appliance so no one steps on or places
anything on the cord or against it. Keep the cord out of reach of children. When
moving the appliance, make sure not to damage the power cord.
•
Auxiliary items: Do not use an inverter, adaptor, or extension cord with this
appliance. If the cord is too short, have a qualified electrician install an outlet near
the appliance. Use of an extension cord and an inverter can negatively affect the
performance of the unit.
• Protect from moisture: To protect against the risk of electric shock, do not immerse
the unit, cord, or plug in water or spray it with any other liquid. Do not connect or
disconnect the electric plug when your hands are wet. Turn the power switch off
before removing the plug from the socket.
•
Electrical work: Any electrical work required for the installation of this appliance
should be carried out by a qualified electrician.
• Never use this appliance with a damaged refrigerant circuit. If the coolant circuit
becomes damaged, avoid proximity to open fires and all types of heat sources. The
room in which the appliance is located should be ventilated for a few minutes.
WARNING:
To reduce the risk of fire, electric shock, or personal injury,
always unplug the appliance from the socket when not in use, when
moving and before cleaning or servicing. Never unplug the unit by pulling
the power cord. Always grip the plug firmly and pull straight out from the
power point.