Kogan IBIZA KASPABWIBZA, Руководство пользователя

Страница: 25 / 32

Control panel is
not working
The control panel has an
auto-lock, which is activated
after 5 minutes of inactivity.
The LED display has one
icon:
If the lock icon is
highlighted, the control panel
is locked.
• Control panel is not
activated.
• To unlock the control panel, press the
button for 3 seconds. If the
control panel will not unlock, restart
the pump - unplug and plug in the
pump
• Press the on/off button for 2 seconds.
If the problem persists.
U
nsure what
kind of chemicals
should be used
for water
maintenance
Please consult your local chemical supplier for information about
chemical maintenance.
Pay close attention to the chemical manufacturer’s instructions
Water leaks from
the adapters
between the
pump and spa
•
Seals are missing inside
the pump adapters
•
Seals are not in the correct
position
• Seals are damaged
• Adapters are not tightened
correctly
•
Insert the stopper caps on the spa
ports to prevent the water from
escaping and disconnect the pump.
Check if the seals are in place.
• If the seals are not in the correct
position, open the gears and place
the seals in correct position.
• If the seals are damaged, they must
be replaced.
•
If the seals are in correct position, the
adapters are not tightened correctly.
Connect the pump to the spa, hand-
tighten the adapters and remove the
stopper caps from the spa ports. If
there is leakage, tighten the adapter
until there is no leakage.