8
Initial Setup Instruction Guide
Power ON/OFF: Standby mode
- Press POWER
(
)
button on the remote control or on
the side panel to turn on the unit.
[The power indicator changes from red to green]
- Press POWER
(
)
button on the remote control or
on
the side panel again to return the display to standby mode.
[The power indicator changes from green to red]
Selection of Input Mode
- Press the Input (AV/TV) button to display the signal source menu.
- Press
or
button to select the signal source you desire,
then press the Enter button to confirm.
When selecting the input source, the screen will display the information
of the selected input source. For example:
TV mode
-
When there is no signal from the selected source or channel, a warning message will be displayed.
-
If you see the “No Signal!” warning, you can select a different channel or press the Input (AV/TV)
button to change the selected source.
-
When you first receive your new TV, it is advisable to perform a new “Channel Scan” to setup your
set to receive all of the channels available in your area. Follow the section “Using Channel Scan”’
on page 15.
