background image

   

 

                                                                   

Safety information 

To ensure reliable and safe operation of this equipment, please read carefully all of the   

instructions in this user guide, especially the safety information below. 

 

Electrical safety 

·

The TV set should only be connected to a mains power supply which matches that stated 

on the label on the mains power adaptor. 

·

To prevent overload, don’t share the same mains power supply socket with too many   

other items of equipment. 

·

Be careful to route the mains power cable away from areas where people can trip   

over it. 

·

Unplug the TV when it is not going to be used for a long time. Disconnect both the   

    aerial and the main power cable. 

·

Take care not to expose the TV set or the remote control to water or moisture. 

·

Pull the plug out immediately, and seek professional help if: 

    - the mains power plug or cable is damaged 

    - liquid is spilt onto the TV set, or if it is accidentally exposed to water or moisture 

- anything accidentally penetrates the ventilation slots 

- the TV set doesn’t work normally. 

·

Never remove the cover, there are no user-serviceable parts inside. Allow only   

qualified service personnel to repair this equipment. 

·

To avoid leakage, take out the remote control batteries when: 

- the batteries are exhausted 

- you are not going to use the remote control for a long time. 

·

Batteries should be recycled or disposed of in a proper manner. 

 

Physical safety

 

·

Make sure the set is positioned at least 5cm (2inch) from the wall or furniture. 

·

Never tap or shake the screen for any reason. 

·

Take care not to drop or sit on the remote control. 

·

Clean the set using only a soft, clean, dry cloth. Do not use any solvents. 

 

 

 

 

 

 

 

 

Содержание HDMI HD22


























Отзывы: