Chapter I Beginning Use
4
Press the power key of the GPS navigator and let go after at least two seconds to power it on.
[Note] Great humidity fluctuation may lead to short circuit of the GPS navigator. Power on the
navigator after it has accommodated to new environment.
1.3.1.2. Powering off & Sleep
Press the power key and let go after at least two seconds to power off the GPS navigator. The
following interface will be prompted. If
is selected, the navigator will automatically resume
the state before entering sleep mode when it is powered again.
1.3.2 Restarting the System
When the system does not response, press the reset key on the back of the GPS navigator to restart
the system.
[Relevant Information] The following situations might lead to no response of the system.
1. Delay or pause in interface switching;
2. Failure of function activation with overlong execution;
3. Failure to power on/off the GPS navigator by pressing the power key.
[Note] Restarting the system by pressing the reset key will result in loss of unsaved data. Please
backup your data regularly.
1.3.3 Fixing the GPS Navigator with Mounting Kit
The mounting kit is composed of a back splint and a bracket. To use the GPS navigator in an
automobile, fix it on the dashboard under the front windshield.
[Note] Do not place the GPS navigator in positions obstructing the driver’s vision. Do not place it
without fixing it or in the place of air bag or the area after the air bag is inflated.
