background image

 
3.

 

Safety precautions for charger and battery 

 

a)

 

Do not charge the battery when the temperature is below 32"F (O'C) or above 113'F 

(45'C). The most suitable temperature for charging is 68-78"F (20~25'C). 

b)

 

Do not insert objects into the hole reserved for the battery in the charger. 

c)

 

Never short-circuit the battery. Short-circuiting the battery will severely damage 

the battery and cause dangers of fire and explosion.

 

 

d)

 

This appliance is not intended for use by persons, including children, with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge, 

unless they have been given supervision or instruction concerning use of the 

appliance by a person responsible of their safety. 

e)

 

Children should be supervised to ensure that they do not play with the appliance. 

f)

 

Do not dispose of electrical appliances as unsorted municipal waste; use separate 

collection facilities. 

g)

 

If electrical appliances are disposed of in landfills or dumps, hazardous substances 

can leak into the environment, damaging health, and well-being. 

h)

 

If the supply cord is damaged, it must be replaced by Kogan.com or its service 

agent to avoid a hazard. 

 

 
 
4.

 

Disposal of exhausted batteries 

 
For safety and to preserve natural resources, recycle or dispose of properly. This product 

contains a lithium-ion battery and must be disposed of properly. Local, state or federal laws 

may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste 

authority for information regarding available recycling and disposal options. 

 

 

WARNING:

 

The parts inside the charger are live and can create a shock 

hazard. Do not stick anything in the battery charger terminal slots. 

WARNING:

 

If any parts are missing, do not operate tool until the missing 

parts are replaced. Failure to do so could result in possible serious personal 

injury. 

WARNING:

 

Do not attempt to destroy or disassemble the battery pack or 

remove any of its components. Do not touch terminals with metal objects 

as short-circuit may result? Keep away from children. Failure to comply with 

these warnings could result in fire and serious injury. 

Содержание CERTA CT20V2BCHSA





























Отзывы: