Kofloc EX-700R, Инструкция по эксплуатации

Страница: 19 / 25

MJ400271F1
- 18 -
②
Setting mode No. and description of set values
M ode No. Set Item
Default
Value
0: 20
℃
,1atm
1: 0
℃
,1atm
2: 25
℃
,1atm
0: Disable
1: Enable
0: No.
1: M oving average of sampling 2 times
2: M oving average of sampling 4 times
3: M oving average of sampling 8 times
4: M oving average of sampling 16 times
5: M oving average of sampling 32 times
0: 25ms
1: 50ms
2: 100ms
3: 200ms
4: 500ms
5: 1000ms
0: disable
1: enable
Analog output
selection 0: 4-20mA
1: 0-5V
2: 1-5V
P-05
0
A B C D
0
Analog output
Description of set values
F-00
Indication of max.
value (Full scale)
※
A B C D
2 0 0 0
The value of the full scale is indicated. Unchangeable. M ax value :2000
P-00
Reference condition on
flow rate
※
A B C D
0
Set the flow rate reference condition.
※
The default values are as per the sp ecifications.
Reference condition on flow rate
1
A B C D
Low cut function selection (±0.5%F.S.)
P-01
Low cut function
selection
3
A B C D
Input signals are measured during the p eriod set here and an average value is calculated. Therefore, the
indication is averaged and updated at the set cycle.
1
0:Disable: Instantaneous flow rates below 0.5% F.S. are indicated. Negative values are also indicated.
1:Enable: Instantaneous flow rates below 0.5% F.S. are indicated as 0. Negative values are also
indicated as 0.
P-02 PV filter
0
PV filter
3
A B C D
0
Instantaneous flow rate indication update cycle
1
A B C D
0:Disable: The integrated flow rate value is reset when the power is turned off.
1:Enable: The integrated flow rate value is held after the power is turned off.
The integrated flow rate value hold cycle is 1 minute.
0
(The integrated flow rate value hold cycle :1min.)
Integrated flow rate hold
P-04
Integrated flow rate
hold selection
P-03
Instantaneous flow
rate indication up date
cycle