35
English
Error indication and troubleshooting
Follow below table to understand error messages and how to remedy. Error messages are shown in
display during use.
Error message
Possible reason
Remedy
LED light is on
Water tank full or pump error
• Empty condensation water tank.
• If the error code is sill shown there,
contact your service agent.
E64
BLDC motor communication error
Contact your service agent
E82
PCB communication error
E32
Error of humidity sensor
E33
Error of temperature sensor
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under
Solution
, please contact your manufacturer.
Problem
Solution
Display doesn’t light on
• Check power supply
• Check preset program
• Check fuses of you electric supply
Dryer doesn‘t start
• Make sure the door is closed
• Chose correct program and push start / pause
Water leakage
• Align dryer horizontally.
• Check air condenser, sealing cap and drainage and make sure it
is installed correctly.
• If the problem persists contact your service agent.
Door opens by itself or
cannot be closed
• Close door slowly until it clicks. Do not slam the door.
• Remove clothes if overloaded
Humidity in the room
increasing significantly
• Ventilate room adequately.
• Clean the air inlet grille.
• Ensure that the air condenser has been inserted.
Degree of dryness not
reached or drying time too
long
• Clean lint filter and wash condenser.
• Empty condensation water tank.
• Clean the moisture sensors.
• Use next higher drying program or use Timer program.
IM_KTD9322A3_200603_V05_HR.indb 35
IM_KTD9322A3_200603_V05_HR.indb 35
3/6/2020 5:07 PM
3/6/2020 5:07 PM