Koenic KST 245, Руководство пользователя

Страница: 20 / 86

20
English
Fill in water
Caution
Do not put any fragrances, vinegar, laundry
starches, decalcifying agents, ironing aids or
other chemicals in the water tank.
Note
If the tap water in your area is very hard,
using equal parts of tap water and distilled
water is recommended; but do not use
distilled water only.
1
Press the release lever under the grip and
remove the water tank.
2
Open the fill in opening and fill the water
tank with water. Caution! Do not fill the
water tank above the MAX mark.
3
Put the water tank back to the steam station.
Dry Ironing
4
Set the desired temperature on the
temperature control dial. The status-light
at the steam iron turns off if the preset
temperature is reached.
For temperature setting see reference table
below.
Care symbol
of clothing
Corresponding
setting at iron
Material/
Remark
• Synthetic
•• Silk, wool
••• Cotton
• MAX Linen
— Do not iron!
Steam Ironing
Note
Steam ironing and steam jet function are only
available at a higher temperature setting
( and above). If the temperature setting on
the iron is too low, water drops will come out
during steam ironing and steam jet function.
Caution
Always iron on a heat-resistant surface only.
Ensure the Anti-calc rinsing cap is tightened
before use.
5
Place the steam station as desired on a
stable surface.
6
Unwrap the power cord from the storage
and connect the power plug to a suitable
power outlet.
7
Set a temperature between to MAX
with the temperature knob for steam
ironing.
8
Press the ON/OFF button to switch on
the steam station. The operation indicator
lights on and the “Low steam” indicator
flashes.
9
Set the desired steam amount with the
steam level button:
Press
Button
Indicator Function
0 x Low steam
1 x Medium steam
2 x High steam
3 x Low steam
IM_KST245_151217_V04_HR.indb 20 17/12/15 10:10 AM