Koenic KMW 2221 B, Руководство пользователя

Страница: 26 / 110

26
English
Attention
Do not attempt to operate this oven with
the door open since open door operation
can result in harmful exposure to microwave
energy. It is important not to defeat or
tamper with the safety interlocks.
Do not place any object between the oven
front face and the door or allow soil or
cleaner residue to accumulate on sealing
surfaces.
Do not operate the oven if it is damaged. It
is particularly important that the oven door
closes properly and that there is no damage
to the
• door (bent),
• hinges and latches (broken or loose),
• door sealing and its surfaces.
The microwave should not be adjusted or
repaired by anyone except properly qualified
service personnel.
=
Materials you can use in an
microwave oven
= Materials to be avoided in an
microwave oven
The list below is a general guide to help you
select suitable utensils:
Cookware
Micro-
wave
Grill Combi
Heat-resistant
glass
Non-heat-
resistant glass
Heat-resistant
ceramics
Mirowave-safe
plastic dishes
Kitchen paper
Metral tray
Cookware
Micro-
wave
Grill Combi
Metal rack
Aluminium foil and
containers
Before use
1
Place the microwave on a flat, stable
surface.
2 Leave space for sufficient airflow:
minimum installation height 85 cm
above the oven 30 cm
at the back 0 cm
on both sides 20 cm
3
Do not cover or block any openings on the
appliance. Do not remove feet.
4 Do not operate the microwave without
turntable roller on the shaft and glass tray
in proper positions.
5
Connect the appliance to a suitable wall
outlet. Unplug when not using for a long
time.
Notes:
• Remove all packaging materials, including
tape, from the door, cavity, switches, and
accessories.
• Do not place the oven where heat, moisture
or high humidity are generated, or near
combustible materials.
• Make sure that the supply cord is
undamaged and does not run under the
oven or over any hot or sharp surface.
• The power plug must be readily accessible
so that it can be easily disconnected in an
emergency.
IM_KMW2221B_140801_V06.indb 26 1/8/14 9:50 am