Koehler K19201, Руководство по эксплуатации и инструкция

Страница: 10 / 23

K19201 Water Washout Tester
Operation and Instruction Manual
K19201-Manual
-10-
1 Introduction
The Koehler Water Washout Tester K19201
rotates a lubricated ASTM ball bearing at 600 rpm
while impinging the bearing with a stream of
water at the specified flow rate and temperature.
This manual provides operating instructions for
the K19201 Water Washout Tester, and should
be used in conjunction with applicable standard
test methods.
1.1
Koehler’s Commitment to Our
Customers
Providing quality testing instrumentation and
technical support services for research and
testing laboratories has been our specialty for
more than 50 years. At Koehler, the primary focus
of our business is providing you with the full
support of your laboratory testing needs. Our
products are backed by our staff of technically
knowledgeable, trained specialists who are
experienced in both petroleum products testing
and instrument service to better understand your
requirements and provide you with the best
solutions. You can depend on Koehler for a full
range of accurate and reliable instrumentation as
well as support for your laboratory testing
programs. Please do not hesitate to contact us at
any time with your inquiries about equipment,
tests, or technical support.
Toll Free: 1-800-878-9070 (US only)
Tel: +1 631 589 3800
Fax: +1 631 589 3815
Email: info@koehlerinstrument.com
http://www.koehlerinstrument.com
1.2 Recommended Publications
1. American Society for Testing and Materials
(ASTM)
100 Barr Harbor Drive
West Conshohocken, Pennsylvania 19428-
2959, USA
Tel: +1 610 832 9500
Fax: +1 610 832 9555
http://www.astm.org
email: service@astm.org
ASTM Publication:
•
ASTM D1264: Standard Test Method for
Determining
the Water Washout
Characteristics of Lubricating Greases
•
ASTM D4950: Standard Classification
and Specification for Automotive Service
Greases
2. Energy Institute (IP)
61 New Cavendish Street
London, WIM 8AR, United Kingdom
Tel: 44 (0)20 7467 7100
Fax: 44 (0)20 7255 1472
http://www.energyinstpubs.org.uk/
IP Publication:
•
IP 215: Determination of Water Washout
Characteristics of Lubricating Grease
3. Federal Test Method (FTM)
FTM Publication:
•
FTM 791-3252
1.3 Instrument Specifications
Model: K19201
Electrical
Requirements:
115-230V, 50/60Hz
Test Temperature: 38°C and 79°C
Temperature Control
Stability:
± 1°F (±0.5°C)
2 Safety Information and Warnings
Safety Considerations. The use of this
equipment may involve hazardous materials and
operations. This manual does not purport to
address all of the safety problems associated with
the use of this equipment. It is the responsibility
of any user of this equipment to investigate,
research, and establish appropriate safety and
health practices and determine the applicability of
regulatory limitations prior to use.
Equipment Modifications and Replacement
Parts.
Any modification or alteration of this
equipment from that of factory specifications is
not recommended and voids the manufacturer
warranty,
product safety, performance
specifications, and/or certifications whether
specified or implied, and may result in personal
injury and/or property loss. Replacement parts
must be O.E.M. exact replacement equipment.