Kody Technologies LLC
Bike Rack Light
–
1Up Equip-D
Kody Technologies LLC
Protect Your Ride
Davis CA, 95618
Installation Instruction
Model #: 101-020
1.
The light installs to the screws on the sides at the
end of the rack. It uses new longer hardware in
current locations, fits cleanly and does not affect
any rack operation.
2.
Remove the four screws. The rear backet should
remain in place without any need to hold or
clamp it in position.
3.
Set the bracket in place lining up the screw holes.
4.
Install the longer screws with washers (all
provided). Thread them into place and then
tighten securely. Be careful not to over tighten as
the aluminum is soft. Package might contain
black or silver screws so the image might not
match your assembly.
5.
Route the cable along the center of the bike rack
and secure with the provided cable ties. Route
the cable away from and around all pivots to keep
from pinching and provide slack for movement.
6.
Connect the light to your vehicle
’
s power supply
and test all light functions (tail, brake, hazard,
left and right-hand turn signals).
7.
If turn signals do not function correctly on your
vehicle, please see the “How to” page on our
website for LED Trailer Lights or contact us.
Any questions, ideas, or concerns? Please contact us
at
REMOVE
SCREWS (4X)
ALIGN
BRACKET
SCREW
SAND
WASHERS
CABLE TIES
