WIRING INSTALLATION
RED:
Constant 12vDC +
YELLOW:
Switched 12vDC+
BLACK:
Ground -
BLUE:
Auto Shutdown Trigger (400mA max. output)
[Optional - See block diag. 2 or 3]
POWER CONNECTOR PINOUT
POWER HARNESS INSTALLATION [Block Diag. 1]
15A
7.5A
KDCF31 ETHERNET DRIVERS
Toughbook computers older than CF30 MK2 will need to update the Ethernet
driver that shipped with the operating system of the notebook computer. The
driver can be downloaded from the Kodiak website. Please follow the link below
to download drivers: http://jottopublicsafety.gojotto.com/docking-station-
downloads
AUTO SHUTDOWN SWITCH SETTINGS
TIMER SETTING
DIP 1
DIP 2
DIP 3
RESULT
ON
ON
ON
DISABLE
ON
ON
OFF
30 MIN
ON
OFF
ON
60 MIN
ON
OFF
OFF
90 MIN
OFF
ON
ON
120 MIN*
OFF
ON
OFF
200 MIN
OFF
OFF
ON
300 MIN
OFF
OFF
OFF
CONSTANT ON**
LOW VOLTAGE MONITORING
DIP
4
RESULT
ON
ENABLED*
OFF
DISABLED
* FACTORY DEFAULT
** The “Constant ON” setting will turn the docking station ON with the ignition
switch, but will never turn it off. This was designed for Fire Departments and
emergency response vehicles who wish to leave the docking station ON all the
time and retain the low voltage monitoring feature.
CORRECT DOCKING METHOD
• Open port replicator door on notebook
• Pull slide tray open
• Insert front of notebook into front lip on slide tray
• Rotate rear of notebook down onto alignment pins
• Be certain notebook is firmly seated into slide tray
• Slide notebook back into docking connector firmly
• Lock docking station
Be certain that the port replicator door is completely open on the Panasonic
notebook prior to docking. Failure to open this access door may result in
bent alignment pins on the docking connector.
