KDCF31
KDCF31
LIMITED WARRANTY
Kodiak Mobile by Jotto Desk will repair our docking station product with new
or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date
of original purchase in the event of a defect in materials or workmanship.
This warranty includes the metal case and internal power supply / port
replicator circuitry, but excludes all other options or accessories, which are
covered by the respective manufacturer of those options or accessories.
This warranty is extended solely to the original purchaser. A purchase
receipt or other proof of date of original purchase and a Kodiak Mobile
SO# will be required before warranty performance is rendered.
This warranty only covers failures due to defects in materials or
workmanship which occur during normal use. It does not cover damage
which occurs in shipment or failures which are caused by products not
supplied by Kodiak, or failures which result from alteration, accident,
misuse, introduction of liquid or other foreign matter into the unit, abuse,
neglect, installation, maladjustment of consumer controls, improper
maintenance, modification or service by anyone other than Kodiak
Mobile by Jotto Desk or an authorized Kodiak Mobile by Jotto Desk
Service Authorized Dealer, or damage that is attributable to acts of God.
Exclusions and Limits:
There are no other express warranties except as listed above.
KODIAK MOBILE BY JOTTO DESK SHALL NOT BE LIABLE FOR LOSS
OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
If you experience a problem with your Kodiak Mobile by Jotto Desk
product during or after your warranty period please contact us at
877.455.6886.
DESCRIPTION
Rugged in-vehicle “intelligent” docking station with internal port
replicator / power supply with auto shutdown / auto activation
capability.
WARNINGS
Do not use bolts longer than 3/8” to bolt docking station to
clevis or pedestal mount. Only use 1/4”-20 x 3/8” grade 8
bolts to secure dock to clevis/pedestal mount. Consult vehicle
manufacturer prior to installation for air bag deployment
zones. Do not install this unit in the driver or passenger air bag
deployment zones.
Only use appropriate mounting hardware that can securely
support the weight of this docking station and computer. Failure
to comply can result in serious injury or death.
FEATURES
1. INTERNAL PORT REPLICATOR
A. COM 1 serial
B. COM 2 serial
C. Video OUT port
D (5) USB 2.0 ports
E. Keyboard / Mouse port
F. Ethernet port
G. Mic IN
H. Speaker OUT
2. INTERNAL POWER SUPPLY
A. 15.7v DC output charging circuit
B. User selectable auto shutdown timer
C. Microprocessor control
D. Power Indicator
E. Docked Indicator
F. Low Volt Indicator
G. Auto Shutdown Warning Indicator
H. Auto Shutdown output trigger
PORT DIAGRAM
Diagram of the port layout located on the bottom of docking station.
ETHERNET USB 2.0 USB 2.0 SERIAL MIC SPKR KBD VIDEO DC IN
A
B
GPS
