8
Step 3 - Install the Upright Poles and Raise the Tent (requires at least two people)
Starting on the ends, and working towards the center of the tent, connect the eight corner upright poles
(2) to the ends of the curved ridge poles (3) making sure the push pins lock into position. Connect the two
center uprights (1) to the center ridge pole (4).
The webbing loops should be positioned below the small posts on the top corner of the upright poles. See
photo below.
Note: The three uprights that meet their ridge poles at the front awning have a canvas sock that they must
pass through. Pass the angled bend on the uprights carefully through the sock from underneath the
awning before attaching to their respective ridge pole.
Once the poles are attached
,
loosen the thumbscrew and extend the upright poles to the required length.
Do not over-stretch, as this can stress and damage the tent. Tighten thumbscrews finger-tight. The
bottom of the corner upright poles (2) will slant towards the center on all sides (see photo on cover).
Tip:
To release the thumbscrews first remove the tension or weight from the pole then turn.
Содержание 6160
Страница 5: ...5 Tent Poles ...
Страница 9: ...9 Figure 2 Frame Diagram ...
