Koden MDC-7010, Руководство по эксплуатации

Страница: 138 / 234

Chapter 4 Target (AIS, TT and Trial manoeuvre) MDC-7000/7900 Series
0093169010-10 4-34
T
4.4 Trial manoeuvre
In case it is suspected the own ship could collide with tracked targets or activated AIS targets, this
function provides such reference information as the actual anti-collision manoeuvre can be taken. This
function is to display the simulation result in the form of graphic vector on the radar display, on the
assumption that the own ship travels with the current course and speed.

Assuming that the own ship and other ships (tracked targets and activated AIS targets) are both
concurrently moving at the present course and speed [CRS·SPD] for the duration set at [DELAY],
vector is displayed in such a way that the own ship is to move at the set [CRS T], [SPD], [RATE OF
TURN] and [RATE OF SPD] from the starting point.
Note:
• Better information is provided by using relative motion and sea stabilization (water tracking).
• The function is terminated once the HDG input, SPD input, LAT/LON input (AIS only) are disrupted, as
tracked targets and activated AIS targets are used.
1
Press MENU
key to display “Menu”.
Select [TARGET] => [TRIAL MANOEUVRE] => [GO], and press ENT key.
2
By turning TRIAL MANOEUVRE [GO], a large character [T] is displayed at the lower center of the
display and the setting menu of TRIAL MANOEUVRE is displayed at the lower right of the display.
T RIAL MANOEUVRE
T RIAL
CRS T
SPD
DELAY
RAT E OF T URN
RAT E OF SPD