Koden KGC-222, Руководство по обслуживанию

Страница: 26 / 43

KGC-222 Chapter 1 Installation
0093822202-01 1-9
Angle compensation of Antenna
The GPS antenna should be installed on the keel line with the BOW mark oriented to the
ship’s bow. If not, HDG should be compensated.
When it is installed with θ ° clockwise off, enter a compensation value [- θ ] in the “MENU 3,
COMPENSATION”. When it is installed with θ ° counterclockwise off, enter a compensation
value [+ θ ] in the menu.
Connecting and waterproofing the connector
Make sure the BOW antenna cable is connected to ANT 1 of the display unit.
(1)
Pay attention to the BOW antenna cable marked with tape.
(2)
Wind the self-bonding tape around the joint section after connecting.
Pull the end of the tape and stretch it to twice its length. Wrap it around joint section a
total of 3 layers. When completed, apply gentle pressure over the surface with fingers to
expedite the fusion.
(3)
Use PVC tape for extra protection.
PVC tape should not be strained. Wrap it around joint section a total of 3 layers. When
finished, press the surface evenly without strain for complete adhesion of the tape.
HDG
θ : Compensable angle
Wind the tape this way
Connector
Self-bonding tape
PVC tape for protection
To Display (ANT 1)
To GPS antenna (BOW)
CW-392-15M
Color tape
Color tape