Koden CVS-705D, Руководство по установке

Страница: 59 / 74

CVS-705D/707D Chapter 2 Adjustment
0092607052-03 2-1
Chapter 2 Adjustment
2.1 Setup of transducer
The frequency and beam angle etc. per
transducer will be conformed to those of the
transducer to be used, then, the correct
information can be provided.
2.1.1 Setup of type of high
frequency transducer
TD Setting
– HF TD Type
Select the type of transducer to be actually
used in high frequency. It has to be adjusted
as it has influence on images.
1. Press .
2. Select [TD Setting] - [HF TD Type].
3. Press of [ ] of .
The setup box of [HF TD Type] will be
displayed.
4. P
ress [▲] and [▼] to select [TD Selection].
When a high frequency transducer is not
used, select [OFF].
5. Press of
[►] of .
When [TD Selection] is selected, the
setup box of [TD Selection] will be
displayed.
Select transducer model to be used.
When unlisted transducer is used, select
[Others1] or [Others2].
When [Others1] is selected, one
high-frequency and one low-frequency
can be set up.
When [Others2] is selected, two
high-frequencies and two low-frequencies
can be set up.
6. Press [▲] or [▼] to select the type of
transducer to use.
7. Press .
The setup box of [TD is set.] will be
displayed.
8. Select [Yes]
with [▲] and [▼] keys.
9. Press .
A
message “It is processing” will be
displayed.
And, after a while the menu will close and
display returns to [TD Setting] menu.
10. Press to close the menu.
It is processing
Please wait for a while.