Koden CVS-705D, Руководство по установке

Страница: 38 / 74

Chapter 1 Installation CVS-705D/707D
1-18 0092607052-03
Connection of transducer
In the case of connection of CVS-705D/707D and transducer:
1) Refer to the connection table of transducers, solder CW-836-3M and CW844-3M to the
transducer. After soldering is completed, be sure to provide the connected part with water
resistance and insulation using self adhesive tape, etc.
2) Connect CW-836-3M after the above processing to J7 connector of CVS-705D/707D.
Connect CW-844-3M after the above processing to J6 connector of CVS-705D/707D.
Fig. 1.21 Connection of transducer cable
Connection table of Water temp. sensor/Speed sensor
J6
Connecting cable
CW-844-3M
Note
No.
Signal name Wire color
4
Shield Shield
For Water temp. sensor
6
Water temp. sensor power Green
7
Water temp. sensor input Red
3
NC Orange NC
1
Speed sensor input Blue
For Speed sensor
2
Speed sensor power (+) White
8
Speed sensor power (-) Black
CW-836-3M
To J7 connector of
CVS-705D/707D
CW-844-3M
To J6 connector of
CVS-705D/707D
NC
To Speed sensor
To Water temperature sensor
Transducer cable
Low frequency transducer
High frequency transducer
Shield
Green
Red
Orange
Blue
White
Black
Black
White
Shield
Green
Red
White, Red
Black, Green
Shield
White, Red
Black, Green
*The ferrite transducer should be connected to the resonance capacitor.
*
*