51
www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Picture orientation is not
accurate
■
Set the Orientation Sensor (
page 28
).
Flash does not fire
■
Check flash setting, and change as needed (
page 15
).
Battery life is short
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a charged battery (
page 2
).
You cannot take a
picture
■
Turn the camera off, then on again.
■
Depress the shutter button all the way (
page 6
).
■
Insert a charged battery (
page 2
).
■
Wait until the ready light is green before attempting to take
another picture.
■
Transfer pictures to the computer (
page 46
), delete pictures from
the camera (
page 33
), switch image storage locations (
page 25
),
or insert a card with available memory (
page 5
).
■
If the camera is in Favorites mode, turn the Mode dial to a
different mode.
Status
Cause
The computer does not
communicate with the
camera
■
Turn on the camera.
■
Insert a charged battery (
page 2
).
■
Make sure the USB cable is securely connected on the camera
and the computer port (
page 46
).
■
Make sure the EasyShare software is installed (
page 39
).
NOTE: This camera is not supported by Mac OS 8.6 or 9.x. You may capture
pictures on a card, then use a card reader to transfer them to the
computer.
Status
Cause
