Transferring and printing pictures
www.kodak.com/go/support
15
Installing the software
CAUTION:
Install Kodak EasyShare software
before
connecting the camera or optional
dock to the computer. Failure to do so
may cause the software to load
incorrectly.
1
Close all software applications that are open on your computer (including
anti-virus software).
2
Place the Kodak EasyShare software CD into the CD-ROM drive.
3
Load the software:
Windows OS-based computer—
if the install window does not appear, choose Run
from the Start menu and type
d:\setup.exe
where
d
is the drive letter that
contains the CD.
Mac OS X—
double-click the CD icon on the desktop, then click the Install icon.
4
Follow the on-screen instructions to install the software.
Windows OS-based computer—
select Complete to automatically install the most
commonly used applications. Select Custom to choose the applications you wish to
install.
Mac OS X—
follow the on-screen instructions.
NOTE: When prompted, take a few minutes to electronically register your camera and software. This lets
you receive information regarding software updates and registers some of the products included
with the camera. You must be connected to your Internet service provider to register electronically.
To register later, see
www.kodak.com/go/register.
5
If prompted, restart the computer. If you turned off anti-virus software, turn it back
on. See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the Kodak EasyShare software.
