OPERATORS MANUAL
8
January 1996 – 990601
Figure 10
Inserting a Cassette
[3] Place a CASSETTE loaded with exposed film on the BASE with the WINDOW in the top left corner.
[4] Keep the left side of the CASSETTE flush with the THICK SECTION of the BASE.
Important
Do not move the CASSETTE during the exposure.
[5] Insert the CASSETTE fully into the SLOT above the BASE.
Note
The entire exposure cycle takes approximately 2 seconds. When you insert a CASSETTE correctly into the SLOT
above the BASE, the ID CAMERA automatically:
• Actuates a mechanical ARM to open the WINDOW in the CASSETTE.
• Illuminates a LAMP to record the identification data, time, date, serial number, and A-P/P-A data on the film.
• Closes the WINDOW in the CASSETTE.
[6] Remove the CASSETTE from the CAMERA after the CAMERA beeps.
[7] Process the film according to the manufacturer's specifications.
H139_0008AC
H139_0008ACA
SLOT
THICK SECTION
OF BASE